Inlägg

MAG

Sorterar bort alla slags metaller ur ett mixat flöde.

Protex-R

Metalldetektor avsedd för textilfibrer i blåsledning

 

P-Scan RG

Cirkulär tunneldetektor med högsta möjliga detekteringsnoggrannhet.

 

UNICON

Komplett bandtrp med detektor. Utförande kan kundanpassas.

VARICON

Komplett bandtrp med detektor. Utförande kan kundanpassas.

 

TM

Trumseparator för montering efter bandtransport.

WM

 

Ersätter befintlig drivtrumma. Mått kan kundanpassas.

MAG 4400 ME

Application
profile
Inspection of: Bulk products
Used in: Recycling industry
Other industries
Typical
applications

• removes metal from minerals
• removes metal from street sweepings 
Product
description

The MAG 4300 series of metal separators removes metal contaminants eg aluminium, steel or stainless steel from bulk materials. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal particles are removed with very little loss of good material and without any interruption to the material flow.
Advantages

• removes all types of metal, including stainless steel
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design 
System
components

Detection Unit: Multi-segment metal detection coil
Segmented single-face metal detector
Control Unit: Microprocessor-controlled evaluation and user interface
Separation unit: Segmented air ejection nozzles
Optional features: Vibratory conveyor
VISUTEC real time management information and remote maintenance system
Technical data

Maximum scanning sensitivity Ø Fe-ball: 1 mm

Mer info om MAG 4400 ME

Produktblad Serviceavtal Nyheter Kontakta oss

Att hitta och separera bort främmande föremål i produkter kan lösas på flera olika sätt.Beskriv era behov så kan vi föreslå en skräddarsydd, komplett lösning.

MAG 4400 ME-W

Application
profile
Inspection of: Individually packed products (incl packed bulk products)
Used in:
Typical
applications

• removes stainless steel from broken window frames
• removes steel from wood chips
• removes aluminium from recycled wood 
Product
description

The MAG 4300 series of metal separators, used in the wood recycling industry, removes metal contaminants eg aluminium, steel or stainless steel from wood chips. The material to be inspected is spread out on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of good material and without any interruption to the material flow.
Advantages

• removes all types of metal, including stainless steel
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design 
System
components

Control Unit: Microprocessor-controlled evaluation and user interface
Separation unit: Segmented air ejection nozzles
Optional features: Vibratory conveyor
VISUTEC real time management information and remote maintenance system
Technical data

Maximum scanning sensitivity Ø Fe-ball: 1 mm mm

Mer info om MAG 4400 ME-W

Produktblad Serviceavtal Nyheter Kontakta oss

Att hitta och separera bort främmande föremål i produkter kan lösas på flera olika sätt.Beskriv era behov så kan vi föreslå en skräddarsydd, komplett lösning.

MAG 4400 ME-G

Application
profile
Inspection of: Bulk products
Used in: Recycling industry
Typical
applications

• removes collars containing lead from container glass cullet
• removes wire-reinforced glass from flat/plate glass cullet
• removes connector pins from crushed lighting tubes and fittings 
Product
description

The MAG 4300 series of metal separators, used in glass recycling, removes metal contaminants eg aluminium, steel or lead from glass cullet. The cullet is widened on an external feeder and reaches the glass slide where the pieces are further individualised before continuing into the inspection area of the multi-channel metal detector. If a metal contaminant is detected microprocessors determine its exact location. Electronics evaluate this position and ejection nozzles are activated with pinpoint accuracy and at precisely the right time to blow out the contaminant. The ejection nozzles are so precise that the metal contaminants are removed with very little loss of cullet. The rest of the cullet, free of metal contaminants, then continues along the conveyor.
Advantages

• removes all types of metal, including stainless steel
• removes metal, metal composites and inclusions
• removes contaminants with pinpoint accuracy
• modular design
System
components

Detection Unit: Multi-segment metal detection coil
Segmented single-face metal detector
Control Unit: Microprocessor-controlled evaluation and user interface
Separation unit: Segmented air ejection nozzles
Optional features: Vibratory conveyor
VISUTEC real time management information and remote maintenance system
Technical data

Maximum scanning sensitivity Ø Fe-ball: 0,8 mm

Mer info om MAG 4400 ME-G

Produktblad Serviceavtal Nyheter Kontakta oss

Att hitta och separera bort främmande föremål i produkter kan lösas på flera olika sätt.Beskriv era behov så kan vi föreslå en skräddarsydd, komplett lösning.